Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WVD24460gb/02
- This topic has 10 replies, 4 voices, and was last updated 13 years, 2 months ago by
dave-m.
-
AuthorPosts
-
January 15, 2013 at 8:32 pm #73557
dave-m
ParticipantHowdy,
Going to look at this tomorrow, it apparently washes and empties but fails to spin.
They reckon it’s not much more than two years old.
I’ve not had the pleasure of this model before, any known problems?Cheers
Dave
January 15, 2013 at 8:36 pm #387909suedehead1
ParticipantRe: WVD24460gb/02
out of balance load?
January 15, 2013 at 8:44 pm #387910dave-m
ParticipantRe: WVD24460gb/02
It may be an out of balance load, or I’m hoping that there’s a little ‘coin operated butterfly valve’ and it’s not actually emptying all the time.
January 16, 2013 at 9:04 am #387911jason1970
ParticipantRe: WVD24460gb/02
out of balance load. What was the customer washing?
January 16, 2013 at 10:10 am #387912Martin
ParticipantRe: WVD24460gb/02
Pump or or brushes or both!
January 16, 2013 at 2:49 pm #387913dave-m
ParticipantRe: WVD24460gb/02
I’ll make sure I have both when I call Martin, cheers.
January 28, 2013 at 9:18 pm #387914dave-m
ParticipantRe: WVD24460gb/02
Update.
Called to this today and sure enough it’s not spinning.
I had stuck in a pump just in case it was failing intermittently, but it empties fine and then just sits there (showing 11 mins left on the ‘super quick’ wash) but you can turn it off and select the spin and it spins ok.
I meggered the heaters and the motor and all are good. The board looks fine and the m/c is only just over two years old.
It’s beginning to look like the board is goosed!Has anyone any other ideas?
Cheers
Dave
January 29, 2013 at 8:30 am #387915Martin
ParticipantRe: WVD24460gb/02
dave-m wrote:(showing 11 mins left on the ‘super quick’ wash) but you can turn it off and select the spin and it spins ok.
Super Quick wash has only a short spin so does it spin at all on that cycle? And does the 11 mins not count down anyway?
January 29, 2013 at 8:42 am #387916dave-m
ParticipantRe: WVD24460gb/02
Hi Martin,
Doesn’t count down and doesn’t spin, just sits there.
After about 6/7 mins i switched it off and selected spin only and it spinded.d
January 29, 2013 at 3:02 pm #387917Martin
ParticipantRe: WVD24460gb/02
One final thought……When it stops at the end is the correct spin speed setting lit (in rpm) or perhaps the no spin (tub) icon?
January 29, 2013 at 11:08 pm #387918dave-m
ParticipantRe: WVD24460gb/02
I’m afraid not, the 800rpm light was lit and the tub icon was off.
D
-
AuthorPosts
- You must be logged in to reply to this topic.
