waa24171gb12 reset

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › waa24171gb12 reset

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 17, 2013 at 4:29 pm #73607
    dopper
    Participant

    done carbons cant get it to reset, tried 2 i found on here no spin speed button on this one, anyone know the reset for this model?
    dop

    January 17, 2013 at 4:34 pm #388140
    Martin
    Participant

    Re: waa24171gb12 reset

    Turn the selector to a program, press start button for 3 secs then turn selector to 11 o’clock then off.

    January 18, 2013 at 8:58 am #388141
    dopper
    Participant

    Re: waa24171gb12 reset

    tried that one didnt work !

    January 18, 2013 at 9:32 am #388142
    Martin
    Participant

    Re: waa24171gb12 reset

    Disconnect motor plug first, do the reset then reconnect motor. 💡

    January 18, 2013 at 12:36 pm #388143
    dopper
    Participant

    Re: waa24171gb12 reset

    ok will try that cheers martin

    January 18, 2013 at 4:37 pm #388144
    dopper
    Participant

    Re: waa24171gb12 reset

    hi so i turned knob to a programme held start for 3 sec let go start turned knob to 11 o clock which is the 30 wash on left side then off, tried with motor plug in and out no joy so does that mean the board is gone ? doing my head in now !anyone advise anymore
    dop

    January 18, 2013 at 4:59 pm #388145
    Martin
    Participant

    Re: waa24171gb12 reset

    Thinking about it I don’t think this model needs or even has a ‘reset’ requirement. So, can I ask what the problem actually is? Presumably you’ve replaced worn brushes but the machine still won’t work?

    January 19, 2013 at 9:18 am #388146
    dopper
    Participant

    Re: waa24171gb12 reset

    yes carbons right down new ones fitted all it does now is the rinse light flashing ???

    January 19, 2013 at 9:41 am #388147
    Martin
    Participant

    Re: waa24171gb12 reset

    dopper wrote:yes carbons right down new ones fitted all it does now is the rinse light flashing ???

    Too bad you didn’t explain that earlier as we could have sussed it back then! 😉

    It’s definately a motor fault, so time to check motor circuit especially the TOC on the brush ring. Also check the motor plug and its connection lead right up to the module.

    Rinse LED flashing. = Motor fault.

    January 19, 2013 at 11:13 am #388148
    dopper
    Participant

    Re: waa24171gb12 reset

    ok cheers

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.