intergrated dishwasher BFI62

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › intergrated dishwasher BFI62

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 29, 2013 at 4:40 pm #73830
    fasetester
    Participant

    hotpoint BF162 end of program pumps out beep and flashes rince light stops thanks fasetester.

    February 1, 2013 at 11:29 am #388918
    fasetester
    Participant

    Re: intergrated dishwasher BF162

    checked heater and wiring checked pump float sw is this a no heat fault any info fasetester.

    February 1, 2013 at 11:54 am #388919
    Hollytree_Technical
    Participant

    Re: intergrated dishwasher BF162

    If it is a BFI62 and If that is the heating time out error then try changing both of the X2 suppression capacitors on the board as they will cause this error – (I will be putting this in the PCB repair tips later along with some other boards).

    Jem

    February 5, 2013 at 5:47 pm #388920
    fasetester
    Participant

    Re: intergrated dishwasher BF162

    thanks jem for your reply. removed pcb cant see any thing burnted. or cap bulging only thing i could see was heat sensing wire plug slighty loose. resoildered it still the same. what are x2 the cap on the pcb should the show damage how do i test them


    what sort of reading should i get thanks fasetester.

    February 5, 2013 at 11:55 pm #388921
    Hollytree_Technical
    Participant

    Re: intergrated dishwasher BFI62

    You will need an LCR or ESR meter to be able to test them and the are unlikely to show any visible signs of failure, See this post to know which they are

    Jem

    February 6, 2013 at 3:59 pm #388922
    fasetester
    Participant

    Re: intergrated dishwasher BFI62

    thanks jem for the reply. that is the white and blue cap in the picture. not the 2 black does. the new ones have to be the same. and where is the best place to get them thanks.fasetester

    February 6, 2013 at 11:28 pm #388923
    Hollytree_Technical
    Participant

    Re: intergrated dishwasher BFI62

    The white one is a relay – You want to change the big blue cap and just behind it in the picture is a little blue cap.

    RS Components

    The first one I have put a link to in my repair post, the second should be served by part no 669-0078

    (these values are from memory – double check the values before fitting).

    Jem

    February 8, 2013 at 3:39 pm #388924
    fasetester
    Participant

    Re: intergrated dishwasher BFI62

    thanks jem for your help fasetester

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.