Lamona HJA8630 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Lamona HJA8630 dishwasher

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • January 30, 2013 at 12:49 pm #73854
    qcarelsen
    Participant

    We went to visit a property and found that after the machine has been on a cycle it keeps steaming and heating and does not continue onto the next part of the cycle. Does anybody know what could be causing this as I have found this same fault on two of these in a week.

    Thanks.

    Lamona HJA8630 dishwasher

    January 30, 2013 at 5:23 pm #389081
    BobHope
    Participant

    Re: Lamona HJA8630 dishwasher

    its the door mounted PCB, the relay melts, cheap as chips to relplace.

    Bob.

    January 30, 2013 at 5:34 pm #389082
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks Bob, have you got a part number for me, O and one more thing, the other one we went out to stopped heating at all,will this be the same fault

    January 30, 2013 at 6:16 pm #389083
    BobHope
    Participant

    Re: Lamona HJA8630 dishwasher

    do you have the product code ?.
    bob

    January 30, 2013 at 6:24 pm #389084
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    The only other number I have got is 95735 and R-54

    January 30, 2013 at 6:32 pm #389085
    BobHope
    Participant

    Re: Lamona HJA8630 dishwasher

    more than likely product code 7676383842 and the info is just below this post second one down.

    Bob.

    January 30, 2013 at 6:41 pm #389086
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Hi Bob,

    Thanks for that, I did think it was the PCB but wasn’t sure, as the first time I heard about this problem was when the customer phoned me due to no heat any more, so I was very unsure about this one as the heater reads fine and there is power going to the heater, do you reckon it still is the same problem, I think it is but I am just double checking.

    January 30, 2013 at 6:49 pm #389087
    BobHope
    Participant

    Re: Lamona HJA8630 dishwasher

    all the 5 i have done were the pcb and the heater relay was bulged or melted, symptoms of no heat or heatng all the time depending on the heter relay welded together or open circuit.

    Bob.

    January 30, 2013 at 6:57 pm #389088
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks Bob, I will go for PCB then, as I am 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure heater is fine. Cheers, and thanks again.

    January 30, 2013 at 7:00 pm #389089
    BobHope
    Participant

    Re: Lamona HJA8630 dishwasher

    you can check the heater from the pcb connections without taking the appliance out.the heater relay is in one corner and the 2 heavy heater wires areeasy to spot.

    Bob.

    January 30, 2013 at 7:06 pm #389090
    qcarelsen
    Participant

    Re: Lamona HJA8630 dishwasher

    Thanks that is a good tip, it is the 2 purple wires, but I normally check it from the bottom without pulling the appliance out if the kick board comes of easy.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.