Electra AWM1100A – 30 second Spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electra AWM1100A – 30 second Spin

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2013 at 11:20 pm #73869
    Hollytree_Technical
    Participant

    Hi All

    This old beast will not kick up to spin speed for more than 30 seconds (the spin program lasts 4 to 5 minutes), I have already tried replacing the start and run capacitors with no change in symptoms and have checked out as much of the wiring that I can, this still passes an insulation check with flying colours and the old lady would like it repaired if at all possible.

    I have just sent off the module to EMW to checked out but does anyone either know what the cause of this fault is and/or have a wiring diagram/sequence chart that they could send me please.

    Jem

    February 1, 2013 at 11:47 am #389128
    Hollytree_Technical
    Participant

    Re: Electra AWM1100A – 30 second Spin

    Module came back as no fault found.

    Anyone got any information on these?

    Jem

    February 1, 2013 at 2:43 pm #389129
    Muv
    Participant

    Re: Electra AWM1100A – 30 second Spin

    Sounds like a tacho coil or magnet fault to me…

    Martin

    February 1, 2013 at 4:15 pm #389130
    spanner51
    Participant

    Re: Electra AWM1100A – 30 second Spin

    The module might be detecting an out of balance load and stopping it spinning, make sure the belt is OK, or even try a new one.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.