Hotpoint dwf70

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint dwf70

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 16, 2013 at 3:57 pm #74171
    AASWALES
    Participant

    Hi I had a look at this d/w today and when I turned it on it filled for 20 sec then al01 so I checked the float switch and it was dry no leaks and the switch is working , I then tried again and it filled and started washing a few mins later al01 again then pumped out , there is no trace of any leak at anytime , customer says she has seen al04 before but I could not get that up ,

    Im thinking pcb ?

    Any ideas

    Cheers

    Alan

    Ps I have heard there is an app for the fault code book on iPhone anyone have a link to it ?

    February 16, 2013 at 6:28 pm #390330
    Criscold
    Participant

    Re: Hotpoint dwf70

    The manual states that – Machines with a turbidity sensor. If the connector is damp or connections damaged,
    A01 will display

    Colin

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.