Hotpoint dwf70

[AASWALES]

Hi I had a look at this d/w today and when I turned it on it filled for 20 sec then al01 so I checked the float switch and it was dry no leaks and the switch is working , I then tried again and it filled and started washing a few mins later al01 again then pumped out , there is no trace of any leak at anytime , customer says she has seen al04 before but I could not get that up ,

Im thinking pcb ?

Any ideas

Cheers

Alan

Ps I have heard there is an app for the fault code book on iPhone anyone have a link to it ?

[Criscold]

Re: Hotpoint dwf70

The manual states that – Machines with a turbidity sensor. If the connector is damp or connections damaged,
A01 will display

Colin

[Author]

Posts