AEG L12843VIT (914606107/02)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG L12843VIT (914606107/02)

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • February 16, 2013 at 7:18 pm #74172
    rocker
    Participant

    when machine is set on a heat cycle, it runs for about 15 to 20 then timer jumps to finish. the heater is working ok, also have tested it on spin cycle only, and it will complete cycle.
    any pointers please.

    February 16, 2013 at 9:17 pm #390331
    Martin
    Participant

    Re: AEG L12843VIT (914606107/02)

    By “heat cycle” do you mean on tumble dry? Any error codes? If that dryer element has any earth leak greater than 40 meg or if the condenser is blocked the dryer will go faulty.

    February 17, 2013 at 8:58 am #390332
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    Martin, thanks for reply, the problem is on wash cycle, when the wash cycle aborted I checked the water was warming up, no error codes ?

    February 17, 2013 at 9:29 am #390333
    Martin
    Participant

    Re: AEG L12843VIT (914606107/02)

    …..and what are the insulation readings on both the water AND dryers elements?

    February 17, 2013 at 11:49 am #390334
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    will get back to you on that, as I only had a multimeter with me, tested with that. (naughty I know)
    I presume the wash element is the same greater than 40 meg,
    john

    February 17, 2013 at 3:13 pm #390335
    Martin
    Participant

    Re: AEG L12843VIT (914606107/02)

    rocker wrote:will get back to you on that, as I only had a multimeter with me,

    Note to self then……. “Make sure I take my Megger with me on every repair!”😉

    February 17, 2013 at 3:47 pm #390336
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    couldn’t have put it better myself. thanks again

    February 17, 2013 at 7:41 pm #390337
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    Update on this machine, customer has just done a 40 deg cycle wash &
    tumble drying cycle. completed no problems
    so it seems its only a problem on hot cycle !! confused !!

    February 17, 2013 at 7:51 pm #390338
    Martin
    Participant

    Re: AEG L12843VIT (914606107/02)

    rocker wrote:confused !!

    Aren’t we both, but we both love a challenge. Next step, out with the Megger, check both elements, resistance reading on water NTC and check through the diagnostics cycle for ‘last error code recorded’ would be the way forward.

    A nice first call Monday morning job methinks. :clown:

    February 17, 2013 at 8:20 pm #390339
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    Martin, Will do, but how do I get into diagnostics please.

    February 17, 2013 at 8:48 pm #390340
    Martin
    Participant

    Re: AEG L12843VIT (914606107/02)

    Same as all the ELux stuff, power off, start/pause button, 1st option button etc……. (See Known Error Codes thread if you really have no idea what I’m talking about) or search ‘diagnostics’ as there’s more on the subject than you can shake a stick at! 😀

    February 17, 2013 at 9:47 pm #390341
    rocker
    Participant

    Re: AEG L12843VIT (914606107/02)

    Many thanks for all your help on this Martin. sure I can sort it now. !!

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.