Hoover DYN10146P

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover DYN10146P

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 18, 2013 at 8:19 am #74185
    storm157
    Participant

    Hi,I have a problem with my Hoover DYN10146P, the digital display just keeps going around in circles ,ie it`s not letting me chose a program,any ideas plz 🙁

    Thanks Mike.

    February 20, 2013 at 3:43 pm #390378
    storm157
    Participant

    Re: Hoover DYN10146P

    Hello, I was hoping someone would have a idea what was wrong , I have been looking and cant find anything with the same problems as it don’t come up with a fault number :(, I have done all the basics , check filter etc, Hope someone can help 🙂
    thanks Mike….

    February 20, 2013 at 5:30 pm #390379
    Martin
    Participant

    Re: Hoover DYN10146P

    I’m thinking it may have something to do with the rotary selector switch? Hoover selector switches are prone to this type of problem based on their poor build quality and dodgy spaghetti electronics. It is an Italian made after all, so try swearing at it in Italian.

    February 23, 2013 at 10:06 am #390380
    storm157
    Participant

    Re: Hoover DYN10146P

    OK Thanks,
    lol yeah I have been shouting a word or two which deff ent English 🙂 , I`ve had a look for the rottery switch and haven’t been able to find one yet,
    I will keep looking thanks again.

    Mike ……….

    February 23, 2013 at 11:51 am #390381
    Martin
    Participant

    Re: Hoover DYN10146P

    storm157 wrote: I`ve had a look for the rottery switch and haven’t been able to find one yet, .

    The part number of the switch is 41031071

    February 24, 2013 at 10:50 am #390382
    storm157
    Participant

    Re: Hoover DYN10146P

    Thank you Martin 🙂 Is that the part I need in this Picture ?
    http://www.appliance-reviews.co.uk/ProductImages/large/DYN10146P_WH_WashingMachine_CP1_AR_L.jpg, the lights around this dial keep going around & around with no error being displayed, as you can tell not to clever when it comes to washing machine parts lol, if this is the part whats the chances of me changing it ( Easy!,Hard!).

    Thanks again
    Mike………..

    February 24, 2013 at 11:34 am #390383
    Martin
    Participant

    Re: Hoover DYN10146P

    storm157 wrote:Thank you Martin 🙂 Is that the part I need in this Picture ?

    It is indeed and I have since realised that that is NOT the part that has likely failed but the module (41031044) behind it that may have? I say may as it could be a connection issue between that module and the coreboard or that module or the main board? Only careful further investigation would establish which. I should hate you to guess and just ‘throw parts at it’ in order you eventually get it working but you could either do that or get an expert in to do it for you. I’ll let you be the judge. 😀

    February 24, 2013 at 10:48 pm #390384
    helo_75
    Participant

    Re: Hoover DYN10146P

    tbh it may well be worth checking that every button is working first.. you may find one of them is sticking

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.