- This topic has 1 reply, 2 voices, and was last updated 13 years, 1 month ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
How is the facia panel removed to get at the pcb on this machine without breaking plastic parts?
GeorgeRe: Bosch WTL6500 facia panel
With the door open, if you look on the underside of the fascia you will see two slots. Insert a small screwdriver in to unclip those latches. The nease fascia forward from the bottom. Water reservoir drawer out, place a knife blade between cabinet and fascia and carefully twist blade to ease side and top away a few mm’s. Likewise along the top length of the fascia and right hand side. Twisting the blade should gently unlatch sufficient enough to remove in one!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.