- This topic has 4 replies, 2 voices, and was last updated 13 years, 1 month ago by
.
-
Posts
-
Hi Machine fills ok ,then does one fast rotation, sits there for a while,might do another,then the strat/ pause light will flash.if you press button will do another rotaton and so on.Any help will be most appreciated.thanks
Re: Beko 5120 W ocasional rotation, then start /pause light
Could be broken wires from the motor tacho to the pcb.
Re: Beko 5120 W ocasional rotation, then start /pause light
hi thanks for the reply.The fault has changed a bit machine fills very high and i dont think it is heating the water .What should the voltage read at the heater! will check wires to the pcb as you suggest thanks
Re: Beko 5120 W ocasional rotation, then start /pause light
It doesn’t really matter what the voltage at the heater is. There is absolutely no need whatsoever to live test. A good multimeter or better still a megger is all you need, first to circuit test from the pcb to the heater and secondly to test the heater itself for continuity, resistance and insulation. If the heater fails then you will usually get an error message.
Overfill is either a blockage in the pressure chamber or a tiny hole in the pressure hose.
Sent from my iPad using Tapatalk HDRe: Beko 5120 W ocasional rotation, then start /pause light
Hi Iadom i went straight to tacho as you sugested! traced to the round tacho magnet on the back of the main motor which was cracked in two.glued it together all working great now .Thank you so much for your assistance.
I think the ove fill was from turning machibe on iys side!
- You must be logged in to reply to this topic.