Zanussi ZDT41 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDT41 dishwasher

  • This topic has 4 replies, 3 voices, and was last updated 13 years ago by Muv.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 29, 2013 at 12:43 pm #74803
    Muv
    Participant

    Hi

    Just been to this machine..
    The pump starts,then machine emits 3 beeps.

    Going to be a pain to remove from fitted kitchen,so want to know what beeps mean before I decide what to do..

    Thanks
    Martin

    March 29, 2013 at 1:46 pm #392954
    Martin
    Participant

    Re: Zanussi ZDT41 dishwasher

    3beeps = Anti flood switch (base flooded) so it’s got a leak somewhere!

    March 29, 2013 at 2:41 pm #392955
    Muv
    Participant

    Re: Zanussi ZDT41 dishwasher

    Ok thanks Martin,I will check that out first..never even gave that a thought..funny how u forget the basics sometimes!

    M

    April 9, 2013 at 1:43 pm #392956
    Muv
    Participant

    Re: Zanussi ZDT41 dishwasher

    Ok been back to the machine,cannot possibly remove it! It seems as though the kitchen was built around it …and the water connection is behind a plasterboard wall,running all the way back to the tap!!

    Anyway by removing the plinth I was able to access the lower part of the machine and remove the front inspection panel,which also allows the plastic base to drop down enough for a peek inside..

    I can’t see any leaks,but more importantly can’t even see a float switch,and as the 3 beeps mentioned in initial post point to the float switch..it’s a bit of a headscratcher at present..

    Anyone have any ideas…

    Martin

    June 10, 2014 at 4:58 pm #392957
    chitts
    Participant

    Re: Zanussi ZDT41 dishwasher

    Same fault, and definately no water in the base!
    Can’t see a float as per most dishwashers, but 2 pressure switches on the side, which both appear to be working, and the tubes are clear. Any clues?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.