ariston magherita 2000

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #7499
    admin
    Keymaster

    I have the above washer it runs for about 2 minutes on any program and then drains and the clock just keeps turning.When it is turning the on/off swith flashes twice and then long pause and then 2 again.I have cleaned the filter and checked all pipe work,it seems ok.Can anyone help me.

    #123697
    Penguin45
    Participant

    Computer is detecting a drive motor fault. Plenty of possibilities, probably engineer time.

    Suggest you check Directories section for a UKW engineer in your area.

    Regards,
    Penguin45.

    #123698
    admin
    Keymaster

    Re: ariston magherita 2000

    Thankyou for your answer,is there any thing i can do as i am an electrical engineer .Or will it require a new component.

    #123699
    Penguin45
    Participant

    Possible faults are motor brushes, motor itself, wiring and very often the computer board.

    Pull the plug first………

    Penguin45. :plug:

    #123700
    admin
    Keymaster

    Re: ariston magherita 2000

    Checked brushes and cleaned up comutator ,all wiring to and from motor look ok.How much are new circuit boards,if this is the fault?.

    #123701
    Penguin45
    Participant

    Ok, we’re getting down to specific parts now, so the model number will be required – Marhgerita 2000 is a generic. Check round the door opening or for a label on the back.

    We can advise further then.

    Regards,
    Penguin45.

    #123702
    admin
    Keymaster

    Re: ariston magherita 2000

    The only thing i can find is model no.a 1435 advantage and thats on the front of the unit.

    #123703
    Dave_Conway
    Participant

    Re: ariston magherita 2000

    I think it’s an AI435 in that case, module is around the £90 mark and there are two different one’s fitted, it’s also one of the one’s that may also require a new EEPROM.

    We will need the full spec on this machine (full model number and serial number) to be able to identify correctly(from the rating plate, possibly on the back).

    Dave.

    #123704
    admin
    Keymaster

    Re: ariston magherita 2000

    The code on the back of the machine is A1435 uk.And the code on the circuit board is cod.215005377.07 0/05 s/w 1.32.I think its time to go and buy a new washer any recomendations.

    #123705
    Penguin45
    Participant

    I like Bosch………
    P45.

    #123706
    admin
    Keymaster

    Re: ariston magherita 2000

    I have been out and bought a new washer,it is now working as i type.The job turned out to be a nightmare,thankyou for your advise.The only good thing to come out of it is that i fund 56 pence a washer and a belt buckle from the filter.Thanks again Balerman.

    #123707
    Penguin45
    Participant

    Go on, tell us what you bought!

    #123708
    admin
    Keymaster

    Re: ariston magherita 2000

    I had already bought the washer before i got your message,but i bought a zanussi zwx 1605w it is very quiet and only cost me £300.Dont tell me they are no good or i will be back on here asking for advice again.All the best Balerman

    #123709
    Penguin45
    Participant

    No, it’s a perfectly adequate machine – if you’ve got a vary spin option on the machine I’d back it off to 1200 and save the high spin for the bedding.

    Good luck with it,
    Penguin45.

    #123710
    admin
    Keymaster

    Re: ariston magherita 2000

    Now the washer is done you dont know anything about potterton boilers do you?

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.