Zanussi ZDQ995X heating fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDQ995X heating fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 16, 2013 at 7:40 am #75038
    GCK
    Participant

    I have a Zanussi ZDQ995X (944171295) double oven on which the fan oven never reaches temperature (conventional oven is ok). During heating I can hear what sounds like the relay cycling. Also it is not possible to reduce temperatures with the touch pad.

    I have fitted a new main oven sensor to no avail.

    Am I going to need a new main board AND touch panel?

    Any advice greatly appreciated.

    April 17, 2013 at 9:47 pm #393673
    electrofix
    Moderator

    Re: Zanussi ZDQ995X heating fault

    with the conventional oven ok that would lead me to say the temp sensor is ok ( unless there are 2 sensors )
    so it sound like your pcb
    but

    i would check the voltage on the element while it is running with a veiw to the following

    1 element fails as it get hot long shot but you cant dismiss it till you have tried
    2 relay that controls the element is faulty

    am not in work at mo so i cant check if i have tech info on this. if its built before pm me will see what i have

    Dave

    April 18, 2013 at 5:42 am #393674
    GCK
    Participant

    Re: Zanussi ZDQ995X heating fault

    Ok thanks. I’ll try that.

    April 18, 2013 at 9:50 am #393675
    electrofix
    Moderator

    Re: Zanussi ZDQ995X heating fault

    have got wiring diag but no service manual

    let me know if you want it

    Dave

    April 19, 2013 at 9:24 pm #393676
    GCK
    Participant

    Re: Zanussi ZDQ995X heating fault

    Thanks. I’ll let you know. My customer is away for two weeks so I’ll get another look at it then.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.