Hoover A1110 – No motor action

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover A1110 – No motor action

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 28, 2013 at 11:35 am #75231
    gadgetdad
    Participant

    Hi guys, have an old Hoover A1110 which does not spin motor, heater ok, pump ok, brushes ok. Dial hunts through progs when running.
    Anyone got a wiring diagram for the motor at all or just pin outs would do. There are two square TOC on this machine does anyone know if they should be NC or NO or a mix of both.

    cheers

    April 28, 2013 at 9:15 pm #394298
    electrofix
    Moderator

    Re: Hoover A1110 – No motor action

    from memory

    motors are simple 2 pins for armature poss going through a toc
    2 or 3 pins for field coil
    2 pins for tacho

    thinks if tacho open circuit motor wont run

    dont know what you mean by 2 square toc

    should have info but would have to dig through old manuals. let me know if you want and i will look and try and scan it

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.