Hoover A1110 – No motor action

[gadgetdad]

Hi guys, have an old Hoover A1110 which does not spin motor, heater ok, pump ok, brushes ok. Dial hunts through progs when running.
Anyone got a wiring diagram for the motor at all or just pin outs would do. There are two square TOC on this machine does anyone know if they should be NC or NO or a mix of both.

cheers

[electrofix]

Re: Hoover A1110 – No motor action

from memory

motors are simple 2 pins for armature poss going through a toc
2 or 3 pins for field coil
2 pins for tacho

thinks if tacho open circuit motor wont run

dont know what you mean by 2 square toc

should have info but would have to dig through old manuals. let me know if you want and i will look and try and scan it

Dave

[Author]

Posts