- This topic has 4 replies, 2 voices, and was last updated 12 years, 11 months ago by
.
-
Posts
-
hi guys i have been having some trouble with this machine, ie replaced module which failed after a short while, it was suggested i tried a different motor as they can cause a prob,although the motor tested out ok, however whilst finding a suitable spare s/h motor i noticed that the wiring on the one i had taken off had a loop across the two connections furthest away from the tacho, possibly this is the wrong motor? and cause of the fault can anyone confirm my suspicions please
Re: hotpoint wt960 motor
Motor connections 1-2 are the motor overload so should be linked together through the overload.
Has the motor been ‘doctored’?
I posted a picture of the wiring for this motor on here a while back, will try and find it.
Jim.
Re: hotpoint wt960 motor
Found it, HERE 😉
Re: hotpoint wt960 motor
thanks for your input iadom , will inspect more closely although the link does not look like a mod. its simply a loop of wire, even if it has been shorted would that cause the control unit to blank out ie no display, i will check motor numbers compatable as well
thanks john
- You must be logged in to reply to this topic.