hotpoint wt960 low water level

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wt960 low water level

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 2, 2013 at 10:53 am #75289
    delta01
    Participant

    hi just fitted an emw recon module, and the water level is very low
    giving poor wash results can this be the module?

    thanks john

    May 2, 2013 at 4:18 pm #394418
    Muv
    Participant

    Re: hotpoint wt960 low water level

    Was this problem evident before of after you replaced the module?
    As it sounds like you just have a blockage in pressure vessel or faulty pressure switch

    Martin

    May 2, 2013 at 5:17 pm #394419
    delta01
    Participant

    Re: hotpoint wt960 low water level

    hi Martin not sure customer had not complained of poor perfomance, however the module was replaced as i returned the previous faulty one (which had no display) so this is a different one, i had thought of trying a p/switch and will do so but not confident that will cure it thanks john

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.