Hoover DYN8144D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover DYN8144D

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 20, 2013 at 6:08 pm #75502
    clockworkone
    Participant

    Customer complaining of burning,acrid type of smell coming off this w/m.Had a look today and checked heater,ntc(24k dropping down to 15k by adding hot water)checked motor,mains filter.ran a quick wash with no smell.heater relay seems to click in and out ok.Got cust to set to her normal wash.Rang later to report no smell.She is adamant it was coming off w/m.Machine is 13 months old.Hoover being stubborn about doing anything to help without charging €120 call out.

    May 20, 2013 at 8:15 pm #395145
    timdowning
    Participant

    Re: Hoover DYN8144D

    As long as the smells gone, all good!

    May 24, 2013 at 2:28 pm #395146
    clockworkone
    Participant

    Re: Hoover DYN8144D

    This one is back. Husband describes smell as like burnt out clutch type of

    smell. Going back Monday. Any ideas.

    May 24, 2013 at 3:06 pm #395147
    Martin
    Participant

    Re: Hoover DYN8144D

    Wall socket or plugtop cooking?

    May 24, 2013 at 9:06 pm #395148
    suedehead1
    Participant

    Re: Hoover DYN8144D

    suppressor?

    May 27, 2013 at 10:22 am #395149
    clockworkone
    Participant

    Re: Hoover DYN8144D

    many thanks for replies.replaced suppressor.paul

    May 27, 2013 at 10:40 am #395150
    Allsorts
    Participant

    Re: Hoover DYN8144D

    That is good if that was the part…

    If you get recalled to it, check the board (module) for tracking between components or connection legs.

    George

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.