Hotpoint TDC62P Condensor Dryer -no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TDC62P Condensor Dryer -no heat

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 23, 2013 at 7:24 am #75545
    Latham63
    Participant

    Checked heater + stats ok. Is there a heat sensor above door on these? Also there is a pcb which controls the sensor drying I beleive? Are my assumptions correct?

    May 23, 2013 at 7:47 am #395264
    iadom
    Moderator

    Re: Hotpoint TDC62P Condensor Dryer -no heat

    There is a stat in the top of the door surround. Pcb failure quite common on these, the dryness module is very expensive but if you look at the ‘Simple PCB Repairs’ thread you will find a link to another thread from a member of the public who managed to repair his pcb.

    Link HERE

    May 23, 2013 at 11:55 pm #395265
    leavemetogetonwithit
    Participant

    Re: Hotpoint TDC62P Condensor Dryer -no heat

    Did one a couple of weeks ago. It was the RT314024. I think the MOTP was probably just taking the sledge approach, although I haven’t read his post. Not sure, but I imagine the other relays may be controlling the motor.
    Mike.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.