- This topic has 4 replies, 2 voices, and was last updated 12 years, 10 months ago by
.
-
Posts
-
Hey gang,
3 Year old dryer stopped heating this morning.
Having read loads, I see its either a stat or an element issue so I stripped it to bits.
I have done a continuity test on the element and it seems OK, I also did a continuity test across the 2 one shot stats in the element and they showed continuity
I also pulled the stat from the front door panel….its one that looks like this
http://shop.ukwhitegoods.co.uk/12584061 … thermostat
Now this doesn’t show continuity…..I’m assuming it should?
Have I checked everything correctly? If so I’ll just go ahead and order a new one
Cheers in advance
AndyRe: zanussi tc7103s not heating
That stat is a very common fault.
PS. The stats on the element are not both one shot stats. 😉
Sent from my iPad using Tapatalk HDRe: zanussi tc7103s not heating
Ahh…..Ok bud, thanks for clarifying. I only thought they were one shots as they looked like it. Shouldn’t have assumed 🙂
So all of those stats should show continuity then?
J
- You must be logged in to reply to this topic.