Aeg favorit 40010v1dishwasher Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Aeg favorit 40010v1dishwasher This topic has 2 replies, 2 voices, and was last updated 12 years, 10 months ago by ddirect. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts June 10, 2013 at 2:48 pm #75793 ddirectParticipant Aeg favorit 40010v1dishwasher fills with very little water. Starts circulating and heating, when i open the door circulation ceases but it continues to heat water? Any suggestions appreciated as long as they are not rude. Darren June 10, 2013 at 4:18 pm #396166 electrofixModerator Re: Aeg favorit 40010v1dishwasher trace the heater wire back to the board and there is probably a relay that controls it. check for close circuit (short) i assume you have checked for earth faults ( most houses have rcd these days but some older ones do not so its worth checking ) Dave June 10, 2013 at 8:15 pm #396167 ddirectParticipant Re: Aeg favorit 40010v1dishwasher Cheers dave i will do as you Suggest ,thanks for the reply Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In