Indesit IWB71250 (UK) No Fill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IWB71250 (UK) No Fill

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 25, 2013 at 10:46 am #75988
    Bernie
    Participant

    Indesit IWB71250 (UK) 30761848700
    Machine is 18 months old, customer used 90deg wash for the 1st time, when they came back all the leds were flashing they could not get the machine to drain, did drain it by dropping hose into bucket. Now will not fill.

    Spins but pump does not run, pump runs on drain.
    Will not fill on any fill program, pump just runs.
    No flashing leds, no fault code
    Pressure switch clicks when blown into, valves test ok.

    Any body have any suggestions.

    Thanks
    Bernie

    June 25, 2013 at 4:29 pm #396875
    Martin
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    What state is the heater in?

    June 25, 2013 at 5:08 pm #396876
    Bernie
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    Thanks for the reply Martin
    I did not test it!
    Bernie

    June 25, 2013 at 5:58 pm #396877
    Martin
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    Bernie wrote:I did not test it!

    Thank you for your confession my son, go forth with your god armed this time with your Megger…….Aaaaaamen!

    June 25, 2013 at 6:10 pm #396878
    Bernie
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    Thanks Martin
    Will give it a go
    Bernie

    June 26, 2013 at 8:57 am #396879
    Bernie
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    Just been back heater is ok – 31ohm, Insulation 999 meg ohms
    Am I now looking at a replacement board?
    Any other suggestions please
    Bernie

    July 8, 2013 at 6:01 am #396880
    sce
    Participant

    Re: Indesit IWB71250 (UK) No Fill

    A melted 1x inlet valve coil?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.