Beko wm6167w 00 02 in display

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko wm6167w 00 02 in display

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 18, 2013 at 3:11 pm #76277
    pmb
    Participant

    Beko WM6167W
    00 02 in display and not starting, the only thing working is the delay timer which increases the the time but 02 will not go when I come back down and try and get zero
    Changed carbon brushes which had warn right down.
    Not sure if 00 02 was a fault code and I need to exit it but how or damaged PCB
    Any ideas

    July 18, 2013 at 3:45 pm #397892
    Martin
    Participant

    Re: Beko wm6167w 00 02 in display

    I think it shows the time remaining? (ie 2 mins) which would be an out of balance spin problem. If that is so then simply press and hold the Start/Pause/Cancel button. Time delay by the way can only be set in 30 min intervals.

    July 18, 2013 at 4:21 pm #397893
    pmb
    Participant

    Re: Beko wm6167w 00 02 in display

    Thanks I did try holding Start button,
    Will go back tomorrow and press start and delay buttons

    July 22, 2013 at 1:18 pm #397894
    pmb
    Participant

    Re: Beko wm6167w 00 02 in display

    Did not work held start and delay no affect.
    Anyone know how to sort the problem?

    July 25, 2013 at 4:05 pm #397895
    pmb
    Participant

    Re: Beko wm6167w 00 02 in display

    Anyone know how I can reset machine
    Any help appreciated

    July 25, 2013 at 4:39 pm #397896
    Allsorts
    Participant

    Re: Beko wm6167w 00 02 in display

    Ring Beko Tech.. According to ‘Your Money Their Tricks’ last evening on BBC1, Beko are the only Manufacturers offering tech advice to independents… It’s got to be true, it was on the BBC 😀

    Good Luck.. Beko Tech 0845 6004911

    George

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.