Beko OIF22100X Fan Motor Problems

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko OIF22100X Fan Motor Problems

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 31, 2013 at 7:50 pm #76471
    jontymox
    Participant

    Good evening all,

    Wondering if anyone can help/advise on a problem with the above integrated oven?

    The customer reported that the above main fan oven was heating up, but the fan was not working.

    I confirmed that the fan motor was faulty, although it gave a good Ohms reading, full voltage was being supplied.

    However, having renewed the fan motor with a genuine replacement, things aren’t much better… the motor does spin, but slowly/sluggishly.

    Perhaps the new motor is faulty, or I am overlooking something?

    Any help much appreciated.

    Jon

    July 31, 2013 at 8:25 pm #398450
    electrofix
    Moderator

    Re: Beko OIF22100X Fan Motor Problems

    if the motor is free and you are applying full voltage then its ok

    some of these motors run slowly to reduce noise it could be normal

    Dave

    July 31, 2013 at 8:55 pm #398451
    jontymox
    Participant

    Re: Beko OIF22100X Fan Motor Problems

    Thanks Dave,

    I was a little concerned as the motor only runs relatively slowly.

    Your helpful remarks may well mean all is well… time will tell!

    Kind regards,

    Jon

    August 1, 2013 at 9:15 am #398452
    kwatt
    Keymaster

    Re: Beko OIF22100X Fan Motor Problems

    Hi Jon,

    I had a quick look and it’s a pretty basic oven.

    The only things that control that motor appear to be the switch assay and there’s a safety stat in the back but, other than that there’s not a lot else to be wrong.

    K.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.