Zanussi FLE 1416W Error

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FLE 1416W Error

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 27, 2005 at 2:56 pm #7650
    grooster
    Participant

    Hi,

    I’ve got a Zanussi FLE 1416W, the one without the counterdown screen. The programme starts emptying then when it should click over to fill, but it flashes up the following leds (from top to bottom), 2,3 and 5. I’ve put the machine into diagnostic, havent had much practice at this on one of these machine with no screen and i get a few more flashing light and beeps. The 3rd, 4th and 6th lights light up.

    Has anybody got any ideas.

    Thanks for your help

    Nick

    January 27, 2005 at 3:09 pm #124509
    Martin
    Participant

    Re: Zanussi FLE 1416W Error

    Grooster,

    Inlet valve open circuit I expect 😉

    Martin

    January 27, 2005 at 3:14 pm #124510
    Dave_Conway
    Participant

    Re: Zanussi FLE 1416W Error

    If I’m reading the code’s correctly, which I think I am, both of those relate to an ovefill condition, pressure chamber blocked is one and overfill the other.

    Hope that helps.

    Dave.

    January 27, 2005 at 6:26 pm #124511
    grooster
    Participant

    Re: Zanussi FLE 1416W Error

    Thanks for the help guys.

    I checked the valves, they are both reading ok and both fill on the test sequence. I tested the main pressure switch and checked for blockages in the chamber, all was ok. I didnt check the smaller pressure switch (overfill), so it could be this.

    Thanks again guys.

    Nick

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.