Whirlpool AWM9000 new heater pops out

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM9000 new heater pops out

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 8, 2013 at 9:24 pm #76597
    stratfordgirl
    Participant

    I’ve just fitted a new Whirlpool 481225928854 genuine heater to a Whirlpool semi-commercial AWM9000 (NC 8570 0841 5000). As I tightened the clamp the heater popped out.

    Examining the grommet, I am not surprised, as it is a loose fit, quite soft, and tapers away from the outer flange. The grommet is only just deep enough to reach the inside of the drum, which is quite thick, so it disappears into the hole when tightened without gripping the inside of the drum.

    I’ve heard about this kind of problem with pattern parts, but not a genuine part stamped “IRCA”. Has anyone else come across this problem on this machine?

    I got it to stay in place by doing it up quite gently, but how long do you think it will last before it pops back out?

    August 9, 2013 at 10:34 pm #398864
    stratfordgirl
    Participant

    Re: Whirlpool AWM9000 new heater pops out

    I went back today and sliced a piece off the old heater’s bung and slipped it under the new heater’s bung. It tightened up fine so I can now sleep easily.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.