Whirlpool Washing Machine error F06

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Whirlpool Washing Machine error F06

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 12, 2013 at 11:25 am #76638
    Jazzynash
    Participant

    Hi

    Can anyone one help I have Whirpool 6th Sense model AWOE 9558B washing machine with error code F06 pointing to control board before I change this is there anything I need to look at?

    I have checked carbon brushes these have abit of life approx 25mm, machine seems to work upto point of rinse/spin then throws error code F06

    August 14, 2013 at 7:24 pm #399331
    Jazzynash
    Participant

    Re: Whirlpool Washing Machine error F06

    Hi

    I notice that 48 views have taken place but not 1 answer surely there must be an engineer out there who can help please please 😥

    August 14, 2013 at 7:42 pm #399332
    Andy jones
    Participant

    Re: Whirlpool Washing Machine error F06

    Does it actually go into rinse, if so is it pumping correctly


    Sent from my iPad using Tapatalk HD

    August 14, 2013 at 7:54 pm #399333
    Jazzynash
    Participant

    Re: Whirlpool Washing Machine error F06

    Hi Andy

    Many thanks for your reply

    Yes pump is ok as I removed & checked this when I have on spin only it does drain water away I did rotate the drum by hand from rear of machine,workrd for about 2mins then stopped as if it wasn’t able to pick up speed?

    August 15, 2013 at 9:22 am #399334
    kwatt
    Keymaster

    Re: Whirlpool Washing Machine error F06

    I don’t have the info on that model, Whirlpool are a bit mean on info but, for those that I do have all list E06 as being a motor tacho issue.

    Could be loose, could be wring to it, could be faulty, could be the motor itself or could be the PCB.

    K.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.