Flavel Milano 100 (ml10frsp)

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Flavel Milano 100 (ml10frsp)

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • August 26, 2013 at 11:37 pm #76854
    greenman1969
    Participant

    hi
    problems with the main fan oven not working. thought it may have been the thermal cut out fuse but when i removed the back panel there is a brown and white wire which looks like has snapped. it has a rubber sleeve over it (the snapped section) which a silver component inside. i am not sure what this is and would i be able to get a replacement anywhere.
    regards
    sean

    August 27, 2013 at 1:40 am #400017
    Martin
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    It’s a thermal fuse from your description.

    August 27, 2013 at 4:16 pm #400018
    greenman1969
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    thanks for your reply,i was going to upload a photo of it just to confirm it but its saying file to big. apparently this part is discontinued and i am having problems locating the correct part as i need the the wire aswell as this is snapped.
    can anyone point me in the right direction.
    cheers
    sean

    August 27, 2013 at 8:57 pm #400019
    greenman1969
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    would the replacement fuse kit include the cables/wires and is the fuse a disc shape..very vague i know but i am a bit sick of microwave meals now
    cheers

    August 27, 2013 at 9:01 pm #400020
    captaincaveman1
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    Yes its now supplied as a thermal cut out stat and not a thermal fuse so the kit you describe would be correct.

    August 27, 2013 at 9:29 pm #400021
    greenman1969
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    cheers captain
    regards

    August 29, 2013 at 3:10 pm #400022
    greenman1969
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    HI ALL
    back again…just received new cut out fuse/stat for my cooker but being a nitwit i am not sure which spade connector goes on which one. i got the kit (new cables)and chased the old connection back to the fan oven but the other end has 2 connectors and i have another single cable… is there and diagrams etc cos i am stumped..i dont want to knack it all together
    cheers

    August 29, 2013 at 3:39 pm #400023
    greenman1969
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    or is the two plug cable for one of the other models(beko etc)
    anybody got any idea please
    cheers
    sean 😕

    August 29, 2013 at 6:27 pm #400024
    Seamy
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    No diagrams i’m afraid, if you are not up to doing the job, best advice would be to get an engineer to complete the job.

    February 28, 2015 at 12:49 pm #400025
    masonj
    Participant

    Re: Flavel Milano 100 (ml10frsp)

    I had problems with my fan oven being inoperative. Everything tested out fine but noticed that the pilot light for the oven was not lighting up, also that the control dial could be turned in either direction. Removing the top of the hob revealed that the oven control is in two parts. These had become separated. Once the back control was reseated, the pilot light returned and hey presto the fan oven now works. Worth a look.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.