whirlpool awo/d5706/s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool awo/d5706/s

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 15, 2013 at 3:01 pm #77153
    suedehead1
    Participant

    hi, the above washing machine is showing F26 fault which means
    the pump triac is faulty.
    I removed the main module and the pump triac has blown.
    The obvious assumption would be the pump must have blown the triac
    but it looks ok and tested ok.
    I am reluctant to put on a new module in case it goes the same way,
    I would change the pump before trying it but I am still unsure that
    there isnt another fault with the machine.

    September 15, 2013 at 3:28 pm #401191
    Martin
    Participant

    Re: whirlpool awo/d5706/s

    Well it certainly will need both pump and PCB replacing to be sure. Perhaps though water got onto the pump terminals causing the triac to blow?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.