Zanusi ZWF1621W Sticks on last rinse

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanusi ZWF1621W Sticks on last rinse

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 10, 2013 at 5:53 pm #77555
    Twoten
    Participant

    The above machine goes through the wash and sticks on final rinse full of water.
    Rinse hold is not selected.
    The Start/Pause button flashes continually (no pauses).
    No other lights are on or flashing.
    To restart the machine it has to be turned to ‘0’ and then set on spin.
    A wash that should take in the region of 90 minutes is taking about 150 minutes.
    There is no earth fault and the element tests OK.
    I have run through the test sequence without any problems.

    Any suggestions would be appreciated.

    October 10, 2013 at 5:55 pm #402593
    Andy jones
    Participant

    Re: Zanusi ZWF1621W Sticks on last rinse

    Is it taking the conditioner. Could be that valve


    Sent from my iPad using Tapatalk HD

    October 10, 2013 at 6:07 pm #402594
    Twoten
    Participant

    Re: Zanusi ZWF1621W Sticks on last rinse

    The machine is taking the fabric conditioner.
    The valve worked when I went through the test sequence.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.