Bosch WBB24759 washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WBB24759 washing machine

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 22, 2013 at 1:29 pm #77734
    telemek
    Participant

    Hi, I have a WBB24759 washing machine which does not spin or tumble, when testing it after taking an obstruction out of the pump it filled and tumbled ok but when I put it to a spin it just empties, same when I put it on a wash (fills for about 30 secs then empties and shows ready with no drum movement).
    Checked the cable to the motor as it looks like it has given problems in the past.
    Any ideas?

    October 22, 2013 at 3:17 pm #403227
    Martin
    Participant

    Re: Bosch WBB24759 washing machine

    telemek wrote:Checked the cable to the motor as it looks like it has given problems in the past.

    But it’s alright now then is it? Also, have you checked the heater?

    October 22, 2013 at 3:19 pm #403228
    DRH
    Participant

    Re: Bosch WBB24759 washing machine

    could it be a preasure fault?

    October 22, 2013 at 3:22 pm #403229
    Martin
    Participant

    Re: Bosch WBB24759 washing machine

    DRH wrote:could it be a preasure fault?

    I like the sound of that! 😀

    October 22, 2013 at 3:55 pm #403230
    telemek
    Participant

    Re: Bosch WBB24759 washing machine

    No, motor still not turning, checked heater element shows ok with no leak to earth but never checked the pressure switch etc so will check that & post update.

    October 22, 2013 at 4:00 pm #403231
    Martin
    Participant

    Re: Bosch WBB24759 washing machine

    I personally don’t think the pressure switch would have any effect on the motor not working. Gotta be to be the module or motor lead I’m thinking. Have you tried removing the motor lead from the module and checked the motor continuity from that point?

    October 22, 2013 at 4:18 pm #403232
    telemek
    Participant

    Re: Bosch WBB24759 washing machine

    Done that and getting readings on all 5 pins (2 for tacho reading quite high resistance)

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.