- This topic has 4 replies, 2 voices, and was last updated 12 years, 5 months ago by
.
-
Posts
-
its a di612 put it on any programe it drains then goes to fill put fils and pump on and off the programe light flashes 2 times and bleeps does this on any programe, is that an e2 code ?
dopRe: smeg d/washer
owners manual with fault codes
http://www.smeguk.com/smeg_com/docs/man … 206-EN.pdf
Dave
Re: smeg d/washer
cheers for that but didnt help as no normal code coming up, just what i said its the programe light its on that flashes no other lights
dopRe: smeg d/washer
dont know this models timer very well but i would look at pcb to see what sort of power supply it uses. the early ones used a 1.5uF cap which is prone to failure and acts like a low battery fault. ie turn one thing on ok turn on two and timer crashes (see stick above on pcb repairs )
also early models use to throw up fault when the soap draw solenoid was faulty dont know if this fault still causes probs on the later one
finally look for earth leaks causing all sorts of probs on machines these daysDave
- You must be logged in to reply to this topic.