Indesit WIXXW127 F05

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIXXW127 F05

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 1, 2013 at 1:02 pm #77890
    spanner51
    Participant

    I went to this washing machine showing an error code F05. I thought an easy fix of a blocked pump, but no the pump was OK.

    The next thing to check is the pressure chamber, BUT the pressure chamber is moulded into the tub. I squirted some water through the pressure hose with a syringe, which cleared it a bit.

    Question is how else am I supposed to clean it? Perhaps the only cure is to replace the welded tub? Any comments appreiciated

    Graham

    November 2, 2013 at 6:42 pm #403764
    spanner51
    Participant

    Re: Indesit WIXXW127 F05

    Sorry the model should read WIXXE 127. Thanks

    November 2, 2013 at 7:18 pm #403765
    Martin
    Participant

    Re: Indesit WIXXW127 F05

    spanner51 wrote:I squirted some water through the pressure hose with a syringe, which cleared it a bit. Question is how else am I supposed to clean it?

    A bowl of near boiling hot water thrown into the drum, then use the syphon for the ultimate Indesit style blow job! 😉

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.