Dyson dc25 brush head

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dyson dc25 brush head

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 3, 2013 at 1:25 pm #77917
    funbobby
    Participant

    So this is my own vacuum and the head isn’t rotating, is there a common prob with these? I can get the complete head of qualtex but wondered if switches or wiring is prone to problems?

    November 3, 2013 at 1:43 pm #403863
    don
    Moderator

    Re: Dyson dc25 brush head

    We have had a few where the brush roller motors have failed. Trouble is you can’t get the motors as a spare, good old Dyson :rolls:

    I take it you have tried the motor reset switch on the side of the brush roll 😉

    We have also had some where there is no power at the brush head socket on the body which has lead to a broken wire.


    Don

    November 3, 2013 at 3:05 pm #403864
    funbobby
    Participant

    Re: Dyson dc25 brush head

    cant see a reset switch anywhere?

    November 3, 2013 at 3:20 pm #403865
    funbobby
    Participant

    Re: Dyson dc25 brush head

    found a red button next too the 2 main buttons, I assume you mean that one? has continuity but doesn’t click at all?? are the motors a known weak point on these?

    November 3, 2013 at 5:16 pm #403866
    don
    Moderator

    Re: Dyson dc25 brush head

    Found a forum on Dyson cleaners.

    DC25 explosion here You can now get the brush roll motor from them as well here, much cheaper than buying the complete assembly if you need one.


    Don

    November 3, 2013 at 6:20 pm #403867
    funbobby
    Participant

    Re: Dyson dc25 brush head

    many thanks, qualtex do the whole unit for 30 odd quid which seemed pretty cheap.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.