Zanussi ZWD 1472 W Washing Machine Fault E51

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi ZWD 1472 W Washing Machine Fault E51

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 11, 2013 at 6:15 pm #78052
    walker2256J
    Participant

    Hi,

    I had a small leak and turned the machine on its side to get a closer look. In doing so I got water where it shouldn’t go and subsequently found a burned resistor R119 on the PCB.

    I don’t know if there is any other damage and I can’t tell what value R119 should be. The local relays all seem to be operating fine when I applied 12V to their coils.

    Can anyone advise? I’d like to start by replacing this mystery value resistor.

    Thanks

    November 12, 2013 at 8:39 am #404310
    Seamy
    Participant

    Re: Zanussi ZWD 1472 W Washing Machine Fault E51

    E51 = PCB fault current leakage from motor or from wiring.
    Check if there was damage to motor loom or plug at motor, try replacing said resistor but i’d reckon you need a new P.C.B.

    Power off of course when working on or doing testing to appliance.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.