Diplomat ADP8640 (Beko) dishwasher stops ;starts.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP8640 (Beko) dishwasher stops ;starts.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 14, 2013 at 1:23 am #78098
    aqualectric
    Participant

    Diplomat ADP8640 (Beko) dishwasher. Stock no:- 7676483842. Serial no;- 07 100425-01.

    Starts up, fills, then runs the wash motor for 3 – 4 seconds. The lights on the control panel will dim then go out momentarily, the motor stops, then the buttons light up again and the motor restarts and this repeats. I am thinking PCB – but there are 2 – one for the buttons and led’s and the other is the module with the relays on it. There seems to be 2 ‘power’ modules that fit this model as well…so any part numbers would be much appreciated!!
    Any help on which is likely to be faulty? Any Beko gurus out there?

    Thanks,

    Steve.

    November 14, 2013 at 9:16 am #404448
    Criscold
    Participant

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    Hi Steve

    I don’t know the answer as never had this problem, I can send you some info on this machine if you let me have your email.

    Colin

    November 14, 2013 at 9:20 am #404449
    RickT
    Participant

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    PCB fault. It’ll be the 1uf or 1.5uf capacitor (approx 1 1/4″ length next to the relay). Hope that helps!

    November 14, 2013 at 9:28 am #404450
    aqualectric
    Participant

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    I presume the PCB in question is the power board and not the selector board with the buttons on it?

    Cheers,

    Steve.

    November 14, 2013 at 11:25 am #404451
    Lawrence
    Participant

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    power board Steve ,hows things ?

    November 14, 2013 at 9:39 pm #404452
    aqualectric
    Participant

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    Thanks for the replies! And yes, I’m fine Lawrence; really busy this year, been really good. Getting tired sooner but not complaining. :clown:
    Hope all is well with you and yours!!

    Cheers,

    Steve.

    November 14, 2013 at 11:48 pm #404453
    eastlmark
    Moderator

    Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.

    have a good look at the float microswitch in the base first….

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.