Zanussi ZWF1631W error code E20

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi ZWF1631W error code E20

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 17, 2013 at 3:04 pm #78153
    jcttr02
    Participant

    any help would be gratefully received

    Zanussi machine shows error code E20 at the start of the drain cycle with a display time for the program at approx 49 minutes, no drain function starts, but if I hit the start/pause button the machine will carry on the cycle and drain fully, I have taken the back off and cleaned the pipes to and from the drain pump and also from the bottom of the drum,and the foul waste pipe from the machine and the wall drainage.the pipework generally was quite clean,
    the pump does run and the front filter is clean, the pump may be a little noisy in operation but I have no reference to compare.
    thanks in advance

    November 17, 2013 at 6:55 pm #404668
    Martin
    Participant

    Re: Zanussi ZWF1631W error code E20

    The pump needs replacing. The bearings of the pump are worn (hence the racket) and it slows as a result and times out the electronics (hence the E20)…replace the pump!

    November 23, 2013 at 9:35 am #404669
    jcttr02
    Participant

    Re: Zanussi ZWF1631W error code E20

    Hi Martin Just to say a big thanks, the motor I ordered from the on line store here has sorted the issue £12.50 well spent. thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.