Hygena APL 8224 doesn’t heat up

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hygena APL 8224 doesn’t heat up

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 7, 2005 at 11:11 pm #7827
    davidl
    Participant

    Hi can anyone help with this? I have a Hygena APL 8224/1 dishwasher no problems the last 6 years. Now when it washes it doesn’t heat up. What is the likely cause? Many thanks

    February 8, 2005 at 12:23 am #125340
    Penguin45
    Participant

    Re: Hygena APL 8224 doesn’t heat up

    This is a Brandt made dishwasher, so the most likely culprit is the safety thermostat has tripped.

    There are problems with this. Firstly, the reset is inaccessible, secondly it will have tripped due to the machine underfilling. This is a very awkward one to sort out – I would seriously recommend getting some professional help. Check in Directories or Repairs@ for a UKW repairer in your area.

    If you’re going to have a go yourself, pull the plug first. :plug:

    Regards,
    Penguin45.

    February 8, 2005 at 5:00 pm #125341
    davidl
    Participant

    Re: Hygena APL 8224 doesn’t heat up

    Thanks for your swift reply…I will have a look for a repairer in that case!

    September 1, 2005 at 2:08 pm #125342
    davidl
    Participant

    Re: Hygena APL 8224 doesn’t heat up

    After some months of tedious washing up I thought I should get this sorted!

    An engineer has examined the dishwasher and told me it needs a new heating element – but these seem to be hard to find. Can anybody help?

    Many thanks

    September 1, 2005 at 2:15 pm #125343
    NWAR
    Moderator

    David

    Part number for the element is 31X6062 and retails at around £29.99 excluding VAT & P+P from MFI on 0845 7959722.

    Craig

    September 1, 2005 at 2:46 pm #125344
    davidl
    Participant

    Re: Hygena APL 8224 doesn’t heat up

    Blimey that was quick!

    Many thanks Craig

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.