H=e=l=p – its 18 degrees in fridge

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › H=e=l=p – its 18 degrees in fridge

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 25, 2013 at 9:13 pm #78315
    coolpoint
    Participant

    Its Hotpoint FF72P
    Can anybody tell me what components i should replace 😕

    November 25, 2013 at 9:46 pm #405208
    Martin
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    coolpoint wrote:Can anybody tell me what components i should replace 😕

    Try sticking one of THESE in. You never know, it might sort it?

    November 25, 2013 at 10:04 pm #405209
    coolpoint
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    Thx Martin.
    What about the thermistor in the fridge section (white plug that goes into the PCB i think)and the second thermister in the freezer.

    In the freezer, I think there is one with a yellow plug and one with a green plug.

    November 26, 2013 at 8:46 am #405210
    Martin
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    coolpoint wrote:What about the thermistor in the fridge section (white plug that goes into the PCB i think)and the second thermister in the freezer.

    Yeah why not GO FOR IT and cover ALL OPTIONS 😀

    November 27, 2013 at 11:59 am #405211
    coolpoint
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    Thanks Martin.
    Is there anyway I can view the service manual.
    I am going to replace the yellow plug thermistor C00293529 Evap thermistor. If this does not fix, than I need to look at next part or parts to replace.

    November 27, 2013 at 3:25 pm #405212
    Martin
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    coolpoint wrote:Is there anyway I can view the service manual.

    The manual is now out of print but maybe eBay? The part number was :C00220861

    November 28, 2013 at 2:53 pm #405213
    coolpoint
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    Thx again Martin.
    Fitted the new thermistor in yellow plug position.
    It was an insulation displacement connector.
    There were no error codes on power up.
    I am going to trial it for 3 days to see whether the old problem of a warm fridge re appears.
    its at -22 deg c freezer and 3 deg for the fridge at present.
    Fingers crossed.

    December 2, 2013 at 8:44 am #405214
    coolpoint
    Participant

    Re: H=e=l=p – its 18 degrees in fridge

    Its now Monday 2/12/13.
    The fridge has settled down to 2-5 deg c now.
    The freezer is at -22 deg C
    Changing the yellow plug thermistor has sorted my fridge out.
    Fingers cross.
    Does anybody know if I can fix -22 deg. I think it should be at -18 deg. There are no adjustments on the freezer section. Only fridge temp can be set. Is it another thermistor.
    All the best to everyone for the season ahead.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.