Diplomat ADP8101/2 Integrated Dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP8101/2 Integrated Dishwasher

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 8, 2005 at 5:51 pm #7840
    admin
    Keymaster

    Hi

    No one seems to have had this problem before on the site so i thought i would ask….. deperately trying to save some cash.

    This dishwasher appears basic, a start button, hot/cold button. Rotary for cold rinse / off / wash. Three indicator lights Progress/Salt/Rinse Aid.

    Problem is this.
    After watching one too many house shows my wife put half a cup of bleach in to “clean” the inside of the washer. when the bubbles started coming out the sides she turned it off.

    Using a chicken baster i took all the water out, replaced it with new and tried again, same result…… so tried again, and again.
    Problem is the machine keeps running, never stops, never drains…..seems stuck.


    Any help or advice much appreciated.

    thanks

    Jools

    February 8, 2005 at 7:06 pm #125418
    Penguin45
    Participant

    Keep doing it – it’ll clear eventually. It is reluctant to drain because the bleach is turning the water to froth………

    Next time you want to clean it, use lots of lemon juice. Bleach is good for doing autowashers on the boilwash.

    Regards,
    Penguin45.

    February 9, 2005 at 2:27 pm #125419
    admin
    Keymaster

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    Hi

    thanks for the reply………. has now been running with a change of water (about the third change) for 3 hours…. far longer than a normal cycle……

    The water is not frothing any more, but it is also not heating the water at all.

    Any further advice….. is such a pain changing the water ( i use a turkey baster)

    Thanks

    Jools

    February 9, 2005 at 2:57 pm #125420
    Dave_Conway
    Participant

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    The element overheat thermostat will have “tripped” and needs resetting.

    If you’re not confident tackling this, then you’ll need an engineer to do it for you Jools.

    If you are going to have a look, whip the plug out of the socket :zap:

    Dave.

    February 9, 2005 at 3:00 pm #125421
    admin
    Keymaster

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    Dave

    Since I know you do this……

    got any engineers you know in the CM24 area (Stansted way)

    thanks

    February 9, 2005 at 3:14 pm #125422
    admin
    Keymaster

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    or…… since i like a challenge……

    how do you reset the thermostat element……


    Thanks

    Jools

    February 9, 2005 at 3:19 pm #125423
    Dave_Conway
    Participant

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    bluejools wrote:got any engineers you know in the CM24 area (Stansted way)

    Go to repairs@ here:

    http://www.ukwhitegoods.co.uk/search/fi … ineer.html

    And enter your details Jools, there’s a UKW member in your area 😀

    bluejools wrote:how do you reset the thermostat element

    Sorry, I can’t give specific repair advice I’m afraid (EU regs etc..)

    Dave.

    February 16, 2005 at 12:11 pm #125424
    admin
    Keymaster

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    Dave and Penguin45

    thanks for your help with resoultion. I used the contact section of the forum as suggested, received very rapid attention from the local company who fixed the problem at the price quoted AND when they siad they would.

    Thanks for pointing people like me in the right direction


    Jools

    February 16, 2005 at 2:00 pm #125425
    Dave_Conway
    Participant

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    Great, thanks for taking the time to come back and let us know Jools :tup:

    Dave.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.