samsung wf8702rsw/xeu tE2 error

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › samsung wf8702rsw/xeu tE2 error

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 3, 2013 at 10:16 am #78425
    DDA
    Participant

    I have a samsung air refresh washer that is showing the te2 error.
    i have replaced both the thermistors and still the error shows.

    Can anyone shed any light on this before i get the loom or the pcb.
    many thanks

    December 4, 2013 at 1:31 am #405619
    Savbeowulf
    Participant

    Re: samsung wf8702rsw/xeu tE2 error

    If definately seems like a temp sensor error so apart from checking for corroded connections or breaks in the loom I’m not sure what else to suggest

    Sent from my GT-N7100 using Tapatalk

    December 4, 2013 at 7:18 am #405620
    Lawrence
    Participant

    Re: samsung wf8702rsw/xeu tE2 error

    It’s a break in the loom ,pull your wires that go to the sensor and you should find ,butt connect the break and you are away

    December 4, 2013 at 8:06 am #405621
    DDA
    Participant

    Re: samsung wf8702rsw/xeu tE2 error

    thanks for the conformation.
    I think ill bypass the majority of the loom as it is fully, tightly bound with tape, also seems to be an intermittent fault so chances are it wont show when i get my meter our.

    dose the te2 error relate to both wash and air refresh ntc or just one of them, just to make it quicker in future?

    thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.