VTD20 Tumble dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › VTD20 Tumble dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 11, 2013 at 11:56 am #78560
    mjw1208
    Participant

    Have a hotpoint vtd20 dryer with the following fault – press the start button in an machine works ok (if its held in) but as soon as you release it the machine goes off any advice would be helpful thanks

    December 11, 2013 at 2:24 pm #406105
    Andy jones
    Participant

    Re: VTD20 Tumble dryer

    Relay board need replacing


    Sent from my iPad using Tapatalk HD

    December 11, 2013 at 3:57 pm #406106
    iadom
    Moderator

    Re: VTD20 Tumble dryer

    I would get the full serial number and report back, a few changes made to the relay door lock setup on these. 😉

    December 11, 2013 at 8:01 pm #406107
    mjw1208
    Participant

    Re: VTD20 Tumble dryer

    The serial number is 29100149 thanks

    December 11, 2013 at 8:10 pm #406108
    iadom
    Moderator

    Re: VTD20 Tumble dryer

    Hmm, that’s a very low serial number but if you are sure about it then you need a C00199423.

    December 12, 2013 at 9:51 am #406109
    mjw1208
    Participant

    Re: VTD20 Tumble dryer

    Took the relay board out and inspected it and found a capacitor missing ( dry joints on pcb)however on inspection of the dryer base in all the usual carpet of fluff is the said 0.68mfd capacitor ! cleaned it up and resoldered it in pcb and away it goes all ok thanks for the advice anyway

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.