Bosch WAS28461GB/07 E29 fault.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAS28461GB/07 E29 fault.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 31, 2014 at 11:37 am #79293
    aqualectric
    Participant

    Bosch WAS28461GB/07 FD9111.

    Turn to any cycle that fills, press start and about 10 seconds later “E29” flashes up in the display and beeps but only for about 30 seconds. The code disappears and the machine continues on as usual. Completes the cycle perfectly. 😕

    Any ideas on E29?

    Thanks,

    Steve.

    January 31, 2014 at 1:41 pm #408720
    Micky 32
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    Sounds like low water pressure going into the machine, check filters on the inlet pipes not blocked.

    January 31, 2014 at 6:02 pm #408721
    nomadPaul
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    E.29 is def no water detected by flow sensor so Micky 32’s advice is sound

    January 31, 2014 at 11:10 pm #408722
    Micky 32
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    How i know is when at home my mother has a similiar machine and if it’s on and i turn on a tap that code beeps up :rotfl:

    January 31, 2014 at 11:18 pm #408723
    aqualectric
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    Thanks guys; really appreciate the help!!

    Cheers,

    Steve.

    May 31, 2017 at 9:58 am #408724
    Steven
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    I have a Bosch and a Siemens washer that occasionally comes up with this error initial fill starts beeping e29 while still filling water pressure ok and filter clear. Then after it continues through cycle ok?
    When you say sensor on the replies do you mean the pressure switch?

    Strange why it only does it sometimes some washes work perfect.

    Cheers
    Steven

    May 31, 2017 at 12:12 pm #408725
    electrofix
    Moderator

    Re: Bosch WAS28461GB/07 E29 fault.

    as with a lot of appliances these days there is a sensor on the inlet valve that senses water flow

    Dave

    May 31, 2017 at 12:29 pm #408726
    Steven
    Participant

    Re: Bosch WAS28461GB/07 E29 fault.

    Why o why, thanks and cheers for the info.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.