Indesit WIE157 S (UK)

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIE157 S (UK)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 21, 2014 at 11:13 am #79651
    Gushie
    Participant

    My indesit model WIE 157 S uk has decided to be tempramental with some (not all) wash cycles it will start a cycle and then about a minute in to it throw a f-07 error and i have to turn the power off to be able to drain the machine and start the cycle again.

    Does any body know what the f-07 error indicates?

    many thanks

    February 21, 2014 at 11:24 am #410114
    iadom
    Moderator

    Re: Indesit WIE157 S (UK)

    F07 is supposed to signify a faulty heater relay on the main pcb. 😥

    February 21, 2014 at 11:47 am #410115
    Gushie
    Participant

    Re: Indesit WIE157 S (UK)

    thanks for your reply, ill pull the pcb out and start check the coil resitance

    February 21, 2014 at 1:44 pm #410116
    iadom
    Moderator

    Re: Indesit WIE157 S (UK)

    Gushie wrote: ill pull the pcb out and start check the coil resitance

    coil resistance??????

    April 4, 2014 at 9:22 pm #410117
    Gushie
    Participant

    Re: Indesit WIE157 S (UK)

    i forgot to update and mark this as resolved, i took main board out test the relays found 2 where intermittently sticky so replaced them all cost £8 and a 5 minute soldering job.

    Error gone but cycle wouldn’t finish, checked the heating element and it was on its way out so replaced that ~ £12 machine is now fine

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.