Indesit WIE157 S (UK)

[Gushie]

My indesit model WIE 157 S uk has decided to be tempramental with some (not all) wash cycles it will start a cycle and then about a minute in to it throw a f-07 error and i have to turn the power off to be able to drain the machine and start the cycle again.

Does any body know what the f-07 error indicates?

many thanks

[iadom]

Re: Indesit WIE157 S (UK)

F07 is supposed to signify a faulty heater relay on the main pcb. 😥

[Gushie]

Re: Indesit WIE157 S (UK)

thanks for your reply, ill pull the pcb out and start check the coil resitance

[iadom]

Re: Indesit WIE157 S (UK)

Gushie wrote: ill pull the pcb out and start check the coil resitance

coil resistance??????

[Gushie]

Re: Indesit WIE157 S (UK)

i forgot to update and mark this as resolved, i took main board out test the relays found 2 where intermittently sticky so replaced them all cost £8 and a 5 minute soldering job.

Error gone but cycle wouldn’t finish, checked the heating element and it was on its way out so replaced that ~ £12 machine is now fine

[Author]

Posts