hoover oph 614

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover oph 614

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 10, 2014 at 1:31 pm #80277
    delta01
    Participant

    hi just replaced control panel now it just does initial fill then stops
    flashes light 2 times i dont have fault codes for this model any suggestions appreciated
    thanks john

    April 10, 2014 at 1:50 pm #412328
    Martin
    Participant

    Re: hoover oph 614

    Error codes for the ‘Optima’ series ARE in the Known Error Codes thread. 😉

    2 flashes normally would be ‘Fill time out’ if my memory serves…….?

    April 10, 2014 at 3:36 pm #412329
    Redframz
    Participant

    Re: hoover oph 614

    Done one yesterday with the same fault changed the water valve, the diaphragm in it had a tear in it.machine now ok

    April 11, 2014 at 6:47 am #412330
    delta01
    Participant

    Re: hoover oph 614

    thanks guys turned out to be pressure switch gave it a knock with screwdriver and it started filling to level found it faster to get error codes by just putting a search on google

    April 11, 2014 at 7:13 am #412331
    Martin
    Participant

    Re: hoover oph 614

    delta01 wrote:found it faster to get error codes by just putting a search on google


    Whatever dings your bell but Google don’t have access to many of the error codes we put out in the trade forums. So using the search facility here tells you more than Google would ever!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.