Tricity Bendix SE558FPS Outer door

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Tricity Bendix SE558FPS Outer door

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 1, 2014 at 6:21 pm #80507
    Tony589
    Participant

    Hello,

    Mum has removed the outer door from the grill to clean behind the glass and now cannot get it back on.

    I have had a look and there are two tabs on the bottom of the outer door which line up with two holes in the bottom of the inner door, then two screws go through the trim piece and through the top of the inner door but the captive nuts they screw into are about 10mm away and if the outer door is lifted to meet the screws the tabs come out of the holes in the bottom.
    Obviously I am either looking at it wrong or there is a part missing??

    Any help gratefully accepted,

    Thanks,

    Tony.

    May 8, 2014 at 8:51 pm #413134
    Bluephill
    Participant

    Re: Tricity Bendix SE558FPS Outer door

    Hi Tony.

    Sounds like the tabs at the bottom of the door are bent. They should be at right angles to the door. You should be able to bend them back into place carefully with pliers.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.