- This topic has 3 replies, 2 voices, and was last updated 11 years, 11 months ago by
.
-
Posts
-
This dishwasher flashes 7 times which indicates a f7 fault code.
I understand it is the flow meter error. I have not taken the dishwasher out to inspect closely as it’s built in and I was pressed for time.
I decided to take a gamble to order the parts. Which parts do I need to order?
The reed contact?
The can measuring jug?
The water valve?From experience, I rarely have to replace the water valve. Am I right I assuming that the reed contact being the culprit? Does the can measuring jug have the reed contact included? Would I be better off to get the can measuring jug instead of the reed?
Matt
Sent from my iPad using TapatalkRe: Whirlpool dw – ADG7560 – F7 code
give plug at reed switch a wee clean and a squeeze, worst case you need a new one, the pressure switch in sump can also give this error if the black grids all choked with grease
Re: Whirlpool dw – ADG7560 – F7 code
A1engineer wrote: the pressure switch in sump can also give this error if the black grids all choked with grease
If this is the case, do I need to replace the pressure switch or give it a clean?
- You must be logged in to reply to this topic.