Aeg washer dryer L16830 sticks on 1 minute

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Aeg washer dryer L16830 sticks on 1 minute

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 28, 2014 at 10:53 am #80828
    pete harcup
    Participant

    Hi ,I have an aeg w/dryer that sticks on 1 minute at the end of the cycle ,if left will just keep going over and over again,pressure chamber and pipes checked and all ok ,any ideas from anyone ???? Pete.Ta.

    May 28, 2014 at 5:03 pm #414471
    Martin
    Participant

    Re: Aeg washer dryer L16830 sticks on 1 minute

    The symptoms are insufficient to offer a diagnosis. Various components will require testing (pump, motor, heaters etc). In the trade we also do the necessary insulation tests and interrogate the electronics for any error codes. Perhaps your best solution at this point is to seek help by calling out a local independent engineer.

    May 31, 2014 at 2:24 pm #414472
    pete harcup
    Participant

    Re: Aeg washer dryer L16830 sticks on 1 minute

    Hi Martin,
    I did interogate the software and got ‘E35’ ,which means water level too high,I have checked air chamber and tubing(all o.k.) large white pressure switch has 2 clicks when activated,black presses tat with thin blue wires mounted on control pcb doesn’t click but I’ve been told its not supposed to.could it possibly be an earth fault on element or motor ? …..Pete.

    May 31, 2014 at 3:14 pm #414473
    Andy jones
    Participant

    Re: Aeg washer dryer L16830 sticks on 1 minute

    Have you done an insulation test. That could tell you a lot

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.